Glue Sticks for Polysyrene Bonding

43mm adhesive with up to 3 minutes' open time
Tecbond 420 is a high performance, extended open time adhesive primarily formulated for spraying. ..
£207.97
(inc. VAT £249.56)
View Product
43mm high performance spray adhesive with up to 6 minutes' open time
Tecbond 430 is a spray adhesive with a very long open time. Once applied Tecbond 430 will provide..
£252.40
(inc. VAT £302.88)
View Product
Low application temperature minimises the risk of burns
Tecbond LM44 is a white high performance adhesive formulated for application at low temperatures (13..
5.0/5.0 Based on 21 reviews.
£16.72
(inc. VAT £20.06)
View Product
Low application temperature minimises the risk of burns
Tecbond LM44 is a white high performance adhesive formulated for application at low temperatures (13..
5.0/5.0 Based on 1 reviews.
£153.56
(inc. VAT £184.27)
View Product

Standard hot melt adhesives will damage materials such as polystyrene when bonding it to itself or other materials. A bead of hot melt will melt into polystyrene! The adhesives above are used for bonding expanded polystyrene and polyethylene foam assembly

 

Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.