TECBOND 248 / 12mm Clear Acrylic

TECBOND 248 / 12mm Clear Acrylic

5.0/5.0 from 7 reviews

12mm, clear acrylic adhesive for difficult to bond materials (ABS, PVC, Metals)

  • Adhesive Type: Acrylic
  • Colour: Clear
  • Carton Qty Approx: 34 sticks per kg
  • Molten Tack: High
  • Open Time: Long
See full spec

Price Options

Quantity:

Buying in bulk, need a better price?
Give us a call on 0161 627 1001
Which Glue Do You Need?
Try out our glue selector…
Grab A Bargain!
Don’t Miss Out On Our Amazing Offers…

Overview

Tecbond 248 is an Acrylic based clear hot melt adhesive that gives exceptional good adhesion to many difficult to bond materials.

Bonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and Melamine. Good bonds can also be achieved on many plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.

Tecbond 248 has been carefully formulated to give an excellent delivery rate through glue guns such as the TEC equipment. This is important as a good tool output enables sufficient adhesive to be applied and bonds made very quickly maximising bond strength.

All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).

Need a better price we will try and beat any competitors price - Price Promise

For use with all Tec 12mm glue guns.

 

Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.

What is a hot melt adhesive ?

Please contact our technical team on 0161 627 1001 to discuss your application in further detail.

 

Specification

Adhesive Type Acrylic
Colour Clear
Carton Qty Approx 34 sticks per kg
Molten Tack High
Open Time Long
Heat Resistance 75°C
Diameter 12mm
Length 300mm
Low Temperature -30°C

Downloads

Material Safety Datasheet
Download

Reviews

Loading Reviews...

Write Review

Bad
Good