Loctite SF 7649 Activator
Loctite SF 7649 Activator
LOCTITE® SF 7649™ is used where increased cure speed of LOCTITE® anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps
- Technology: Activator for LOCTITE® anaerobic adhesives and sealants
- Application: Cure acceleration of LOCTITE® anaerobic products. Thread Sealing, Threadlocking, Pipe Sealing, Gasketing, Retaining
- IDH: 142479 - 150ml - 135252 - 500ml
- Chemical Type: Copper salt and Aliphatic amine
- Viscosity: Very low
Overview
LOCTITE SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing.
LOCTITE® SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE SF 7649 offers good performance at low cure temperatures, and is recommended when the application temperature is below 15°C.
- Increases cure speed on passive and inactive surfaces
- For low-temperature curing (< 5°C)
- For large bond gaps
Specification
Technology | Activator for LOCTITE® anaerobic adhesives and sealants |
Application | Cure acceleration of LOCTITE® anaerobic products. Thread Sealing, Threadlocking, Pipe Sealing, Gasketing, Retaining |
IDH | 142479 - 150ml - 135252 - 500ml |
Chemical Type | Copper salt and Aliphatic amine |
Viscosity | Very low |
Downloads
Technical Sheet
Download
Reviews
Loading Reviews...
Write Review
