Maximum Torque

Hybrid PA polymer technology is THE ultimate high grab building adhesive.

  • Suggested Appplication Temperature: 5 to 35c
  • Colour: White
  • Pack Size: 290ml cartridge - 12 cartridges per box
See the full specification
Made In Britain

Price Options:

Quantity:

There are no reviews for this product, Be the first...
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

Product Description MAXIMUM TORQUE, based on next generation hybrid/MS polymer technology is THE ultimate high grab building adhesive. The unique polymer blend used in MAXIMUM TORQUE gives incredible initial grab, typically double that of most grab adhesives on the market today, eliminating the need for temporary support in most applications. MAXIMUM TORQUE has the ability to bond almost EVERYTHING to ANYTHING in virtually all conditions, even under water or in the rain. MAXIMUM TORQUE cures to a tough flexible elastic rubber.

Benefits • Incredible initial grab. Double that of most common grab adhesives. • High ultimate bonding strength. • Interior and Exterior Use. • Can be applied to damp/wet Surfaces. • Totally Waterproof & Weatherproof. • Quick Curing. • Over paintable if required. • Solvent Free formula. • Resistant to temperature extremes -40°C to +80°C. • Permanently Flexible. • Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents). • Excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc.

Areas For Use Bonding in almost every application imaginable, both internally and externally. The following are just some examples: • Bonding Brick Slips • As a high quality nail replacement adhesive, even to damp surfaces. • External and internal perimeter pointing around doors and windows, especially in mobile structures such as caravans and boats. • Bonding mirrors to most common substrates. • Automotive gap filling and sealing. Jointing cladding panels. • Bonding difficult materials such as plastic, metals and fiberglass. • Any application requiring high performance, durable bonding of joints.

Limitations • Use on overhead applications – Always use in conjunction with mechanical fixings. • Use in conjunction with mechanical fixings for large mirrors (>1m² total area). • Temporary support is not normally required, however for extremely heavy items; provide temporary support until adhesive has dried. • Note: Product is by its nature stiff to gun. Always discharge using a good quality sealant gun (eg EVERBUILD POWER PRO). • Do not seal mirror edges/plastic sheeting until adhesive has cured. • Do not use on surfaces that bleed oils or plasticizers. • Bonding glass blocks: always check with manufacturer of blocks re; suitability for use before assembly as this is a structural application and their specified methods must be followed. • Over paintability: As quality and type of paint can vary, always test compatibility before use. • Do not use on polythene safety backed mirrors, polypropylene or Teflon. • Using on stone: as quality of natural stone can vary, always test for staining resistance/compatibility prior to full scale use. • It is the user’s responsibility to determine suitability for use. Adhesion trials recommended before large scale application. If in doubt, please contact Technical Services Department for advice. • Yellowing can occur in the dark.

Surface Preparation All surfaces must be clean, sound and dust free.

Application All surfaces to be sealed must be sound and clean. MAXIMUM TORQUE comes complete with a precut V notched nozzle which ensures correct depth of adhesive is discharged from tube. Cut the tip of the cartridge, taking care not to damage the thread. Screw on nozzle and apply using a good quality sealant gun holding the gun at 90 degrees to the surface to be bonded. Apply adhesive direct to back of one surface only, in lines spaced at 30-40mm centres. Immediately place item into position and secure with good, even pressure and with a slight twist action. NOTE: MAXIMUM TORQUE will skin over within approximately 15-30 minutes. Through cure will be approximately 2mm in depth per 24 hours. This may be slower on non-porous surfaces.

Specific Data

Consistency Pasty

Density 1.25-1.35

Application Temperature 5 to 35°C

Skin Formation at 23°C and 50% RH 20 ± 10 min

Sagging (ISO 7390) Nil

Curing at 23°C and 50% RH 2mm / 24hr

Shore A Hardness (ISO 868 – 3 seconds) 50-55 Modulus at 100% Elongation Ca. 1.3 MPa

Elongation @ Break > 300%

Tensile Strength at break > 2.5 Mpa

Shrinkage (ISO 10563) < 4%

Compatibility With Paints Water based: yes (test compatibility) Solvent based: no (with alkyd paints)

Temperature Resistance -40 to +80°C

Coverage As an adhesive – Approx. 1.5m2 when applied as directed.

 

Videos Show

Full Specification Show

  • Suggested Appplication Temperature: 5 to 35c
  • Colour: White
  • Pack Size: 290ml cartridge - 12 cartridges per box

Downloads Show

Technical Sheet
Download
MSDS
Download

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good