RAKOLL® GXL-3 D3 IMO certified

D3 PVAc adhesive with good water resistance and sets very quickly

  • Technology: PVAc dispersion
  • Product Type: D3 certified PVAc adhesive
  • Application: As a one-component product conforms with D 3, and with D 4 when mixed with hardener
  • Appearence: White
  • IDH: 5103634368 - 30 kilo Pail 5103631212 - 1135 kilo IBC 5103631227 - 600 kilo IBC
See the full specification

Adhesive Calculator

Show

Select coat weight (gsm)

Select price/kg (£)

Select Area length (mm)

Select Area height (mm)

Total Glued Area
m2
Adhesive
kg
Cost

Call For Price
0161 627 1001

There are no reviews for this product, Be the first...
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

RAKOLL®-GXL-3 is a PVAc adhesive with good water resistance which meets the requirements of class D 3 as a one-component product and mixed with RAKOLL®-GXL-3-Härter meets the requirements for D 4 standard DIN EN 204. RAKOLL®-GXL-3 sets very quickly. If heat is applied, very short pressing times can be achieved. The bonded joints are characterised by a good high temperature resistance. 

Durability Class in accordance to DIN EN 204

  • Surface bonding of decor-finish film
  • High-frequency bonding
  • Surface bonding of HPL/CPL in short cycle presses
  • Carcass and assembly gluing
  • Meets the requirements for D4 when mixed with 5 % Rakoll GXL-3 hardener
  • Wheelmark certified (Especially suitable for boat building)

Don't panic if you forgot to add the catalyst - The catalyst is not needed to make strong joints, but the bonds will never be reach D4 waterproof !

Single component: D 3 (Expert report by WKI + Institute für Fenstertechnik e.V., Rosenheim) mixed with RAKOLL® GXL-3-Hardener D 4 (Institute für Fenstertechnik e.V., Rosenheim) KOMO-Certificate is available. 

Storage Store: RAKOLL®-GXL-3 away from frost in tightly closed original containers. Storage temperatures in excess of 25 °C considerbly reduces the minimal storage time. RAKOLL®-GXL-3 can thicken a little after pro-longed storage. The adhesive should then be thoroughly mixed and is then ready for use again. Shelf life is at least 9 months.

Pfohl glue applicators have long been well-known and proven

Empty IBC collection advice

Full Specification Show

  • Technology: PVAc dispersion
  • Product Type: D3 certified PVAc adhesive
  • Application: As a one-component product conforms with D 3, and with D 4 when mixed with hardener
  • Appearence: White
  • IDH: 5103634368 - 30 kilo Pail 5103631212 - 1135 kilo IBC 5103631227 - 600 kilo IBC

Downloads Show

Technical Sheet
Download
Material Safety Datasheet
Download

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good