RAKOLL® K 4/581 LV

RAKOLL® K 4/581 LV

Economical filled edge banding

  • Technology: EVA Hot Melt Adhesive
  • Product Type: Filled Hot Melt
  • Application: Edgebanding
  • Appearence: 25 kilo bags
  • IDH: 7015674337
See full spec

Call For Price
0161 627 1001

Buying in bulk, need a better price?
Give us a call on 0161 627 1001
Grab A Bargain!
Don’t Miss Out On Our Amazing Offers…


RAKOLL® K 4/581 LV is suitable for most types of edge materials which have been tested and approved by the substrate manufacturers for use with hot melt adhesive
procedures. However we advise customers to test RAKOLL® K 4/581 LV to ensure this product is suitable for their application and the final destination.

Heat resistance
The heat resistance of RAKOLL® K 4/581 LV  is adequate for all standard requirements of home furniture used in moderate and cold climates.
Heat resistance as measured with RAKOLL®-test method. Raising-temperature is approx. 82°C.

Edging strips can have very different adhesion properties, even across a certain group of material. Appropriate tests must therefore be carried out, in order to check the suitability of the adhesive. The recommendations of the substrate manufacturer must also be observed.

Store RAKOLL® K4/581 LV in a cool and dry place. The shelf life is at least 12 months.

Safety Advice:  At the recommended working temperature, the hot melt will cause burns in contact with skin. Do not inhale fumes that are released at the working temperature. In any case, a suitable exhausting system shall be installed in the working area.

For additional information, please refer to the MSDS for safety advices.


Technology EVA Hot Melt Adhesive
Product Type Filled Hot Melt
Application Edgebanding
Appearence 25 kilo bags
IDH 7015674337


Material Safety Datasheet
Technical Sheet


Loading Reviews...

Write Review