Rakoll® TE 562

Universally used on edgebanders to bond plastic edges (PVC, ABS, PP, etc.), melamines, HPL, veneer, etc., to chipboard and MDF panels

  • Technology: EVA
  • Product Type: Unfilled
  • Application: Plastic edges (PVC, ABS, PP), melamine, HPL and veneer edges to Chipboard and MDF panels
  • Appearence: Granules
  • IDH: 7015573440 - 20 kilo
See the full specification

Adhesive Calculator

Show

Select coat weight (gsm)

Select price/kg (£)

Select Area length (mm)

Select Area height (mm)

Total Glued Area
m2
Adhesive
kg
Cost

Call For Price
0161 627 1001

There are no reviews for this product, Be the first...
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

Product Benefits:

 -  long open time

-  good adhesion properties

-  filler free

-  low odour

-  colourless and transparent

-  presents very high bonding strength, allowing low adhesive spread and almost invisible joints

Typical Applications:

 Universally used on edgebanders to bond plastic edges (PVC, ABS, PP, etc.), melamines, HPL, veneer, etc., to chipboard and MDF panels.

Suitable substrates:

Plastic edges (PVC, ABS, PP), melamine, HPL and veneer edges. Chipboard and MDF panels

Safety Advice:

At the recommended working temperature, the hot melt will cause burns in contact with skin. Do not inhale fumes that are released at the working temperature. In any case, a suitable exhausting system shall be installed in the working area.

Please refer to the MSDS for additional safety advices.

Full Specification Show

  • Technology: EVA
  • Product Type: Unfilled
  • Application: Plastic edges (PVC, ABS, PP), melamine, HPL and veneer edges to Chipboard and MDF panels
  • Appearence: Granules
  • IDH: 7015573440 - 20 kilo
  • Shelf life: 12 months

Downloads Show

Technical Sheet
Download
Material Safety Datasheet
Download

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good