Stixall

It is specifically designed for adhering most common building surfaces to each other and themselves

  • Curing in 24hrs: at 23c and 50% RH - 1mm / 24 hours
  • Skin cure time: at 23c and 50% RH - approx 30 mins
  • Suggested Appplication Temperature: 5 to 35c
  • Colour: White / Black / Grey / Brown / Clear
  • Pack Size: 290ml cartridge - 12 cartridge per box
See the full specification
Made In Britain

Price Options:

Buying in bulk, need a better price?
Call: 0161 627 1001

Available Options:

* Colour

Quantity:

There are no reviews for this product, Be the first...
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

Product Description EVERBUILD STIX-ALL is a one part, chemically curing solvent free sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves 

Benefits · Incredible initial grab, no slip and gap filling properties. · High bonding strength · Interior and Exterior Use · Can be applied to Wet Surfaces · Totally Waterproof & Weatherproof · Quick Curing. · Over paintable if required · Solvent Free · Resistant to temperature extremes -40°C to +100°C · Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents) · Excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc.

Areas For Use · Sealing and bonding in almost every application imaginable. The following are just some examples. · As a high quality nail replacement adhesive, even to damp surfaces. · Perimeter pointing around doors and windows, especially in mobile structures such as caravans. · Bonding mirrors to most common substrates. · Jointing cladding panels. · Any application requiring high performance, durable sealing and bonding of joints. · Applications where resistance to chemical spillage is required

Limitations · Use on overhead applications – Always use in conjunction with mechanical fixings. · Use in conjunction with mechanical fixings for glass block fitting or large mirrors (>0.5m2 total area) · For heavy items, provide temporary support until adhesive has dried. · Do not seal mirror edges/plastic sheeting until adhesive has cured. · In areas of high UV; some darkening/discolouration may occur. This does not affect the performance of the sealant · Over paintability: check compatibility with specific paint first before over painting large areas. · Do not use on surfaces that bleed oils or plasticizers · It is the user’s responsibility to determine suitability for use. If in doubt, please contact Technical Services Department for advice. · Not for use as part of a glazing system. · Not for use in aquarium manufacture. Use CT1  · Not for use in conjunction with bitumen, or asphalt. Use CT1 · Yellowing can occur in the dark · Certified as a sealant for internal use only

Surface Preparation All surfaces must be clean and dust free. Surfaces may be damp, but have no standing water. Can be used under water for emergency repair.

Application Cartridge - Cut the tip of the cartridge taking care not to damage the thread. Fix nozzle, cut aperture to required width and apply with a standard sealant gun.

Specific Data

Consistency - Pasty

Density - ~ 1.5 g/cm3 (1.02 g/cm3 Easi Clear)

Application Temperature - 5 to 35°C

Skin Formation at 23°C and 50% RH - 30 ± 10 min

Sagging (ISO 7390) - Nil

Curing at 23°C and 50% RH - ~1mm / 24hr

Shore A Hardness (ISO 868 – 3 seconds) - 55 – 60

Modulus at 100% Elongation (ISO 8339) - > 0.60MPa

Elongation @ Break (ISO 8339) - > 60%

Tensile Strength (ISO 8339) - > 1.5 Mpa

Shrinkage (ISO 10563) - < 2%

Resistance To UV Radiation - Excellent

Compatibility With Paints Water based: yes (test compatibility) Solvent based: no (with alkyd paints)

Temperature Resistance -40 to +100°C (max 70°C Easi Clear)

Coverage - Approximately 11 linear meters per cartridge

 

 

Videos Show

Full Specification Show

  • Curing in 24hrs: at 23c and 50% RH - 1mm / 24 hours
  • Skin cure time: at 23c and 50% RH - approx 30 mins
  • Suggested Appplication Temperature: 5 to 35c
  • Colour: White / Black / Grey / Brown / Clear
  • Pack Size: 290ml cartridge - 12 cartridge per box

Downloads Show

Stixall leaflet
Download
MSDS Colours
Download
MSDS Clear
Download

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good