TECBOND 263 / 12mm PP Glue Sticks

Bonds Most Polypropylene Products

  • Adhesive Type: Polypropylene
  • Colour: Light Brown
  • Carton Qty: 5kg - 34 sticks per kg
  • Molten Tack: High
  • Open Time: Medium
See the full specification
Made In Britain

Glue Calculator

Show

Select Dots or Beads

Select Glue Amount (KG)

Price Options:

Quantity:

5.0/5.0 from 5 reviews
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

Recommend for all types of polypropylene bonding use Tecbond 267-43

Tecbond 263 is an unique hot melt adhesive with a high molten tack (good instant grab ability) and provides excellent heat resistance (105c) and good low temperature resistance (-20c). Not suitable on all grades of polypropylene, restricted adhesion to grades with high ethylene content.

To maximise bond strength when bonding polypropylene to itself it is important that sufficient adhesive is applied hot and the surfaces brought together as quickly as possible. It is strongly recommended that a good quality high output Tec glue gun is used to ensure the consistent strong bonds.

Recommended only for use with the following Tec glue guns: Tec 810-12 or the Tec 820-12

Tecbond 263 is specifically designed for bonding most types polypropylene (PP) and Correx and is not suitable for bonding of other plastics. Not suitable for bonding polyproplylene products with a higher ethylene content.

All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).

Need a better price we will try and beat any competitors price - Price Promise

 

Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.

What is a hot melt adhesive ?

Please contact our technical team on 0161 627 1001 to discuss your application in further detail.

 

 

Full Specification Show

  • Adhesive Type: Polypropylene
  • Colour: Light Brown
  • Carton Qty: 5kg - 34 sticks per kg
  • Molten Tack: High
  • Open Time: Medium
  • Heat Resistance: 105°C
  • Diameter: 12mm
  • Length: 300mm

Downloads Show

Material Safety Datasheet
Download

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good