Tecbond 267-43

Tecbond 267-43

Excellent for bonding all polypropylene based products. Suitable for bonding Correx.

  • Adhesive Type: Polyolefin
  • Carton Qty Approx: 10 kilo carton approx 17 glue slugs per kilo
  • Molten Tack: Medium
  • Open Time: Long
  • Diameter: 43mm glue slug suitable for use with all Tec 43mm glue guns
See full spec

Price Options


Only 35 left in stock
Buying in bulk, need a better price?
Give us a call on 0161 627 1001
Which Glue Do You Need?
Try out our glue selector…
This product is
made in britain
Grab A Bargain!
Don’t Miss Out On Our Amazing Offers…


Looks like Tecbond 267, bonds like Tecbond 267, however during production this batch has picked up very slight contamination from a previous batch. Normally due to the expensive raw materials used to made this formaultion this batch would be reworked, however it's a one off batch at a very special price to clear. Massive saving on RRP

TECBOND 267 (Special) is a high performance adhesive formulated for Polyolefin plastics such as polypropylene and polyethylene. This adhesive has a high softening point of 150 ˚C and good low temperature resistance of -30ºC.

To maximise bond strength when bonding polypropylene to itself it is important that sufficient adhesive is applied hot and the surfaces brought together as quickly as possible. It is strongly recommended that a good quality high output Tec glue gun is used to ensure the consistent strong bonds.

Tecbond 267 is specifically designed for bonding all types polypropylene (PP) and Correx. 

All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).

For use with all Tec 43mm glue guns.

Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.

Please contact our technical team on 0161 627 1001 to discuss your application in further detail.


Adhesive Type Polyolefin
Carton Qty Approx 10 kilo carton approx 17 glue slugs per kilo
Molten Tack Medium
Open Time Long
Diameter 43mm glue slug suitable for use with all Tec 43mm glue guns


Loading Reviews...

Write Review