TECBOND 421 / 43mm Spray-Tec Glue Slugs

43mm adhesive with up to 3 minutes' open time

  • Adhesive Type: Polyolefin
  • Colour: Clear
  • Carton Qty Approx: 10 kilo - approx 17 slugs
  • Open Time: Up to 3 minutes
  • Heat Resistance: 70c
See the full specification
Made In Britain

Glue Calculator

Show

Select Dots or Beads

Select Glue Amount (KG)

Buying in bulk?
Need a better price?
Call 0161 627 1001

Price Options:

Quantity:

There are no reviews for this product, Be the first...
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

SPRAYTEC 421 is the latest generation of high performance, extended open time spray hotmelt adhesive. Features include outstanding spray- ability and it is clear in colour.

When sprayed, SPRAYTEC 421 can be used for bonding packaging foams, bubble film, vacuum foamed mouldings, upholstery foams, cotton-backed vinyl and many other fabrics.

When applied in bead or dot form good bonds can be achieved on most plastics. Bonds can also be achieved on polypropylene such a ‘Corex’ when the adhesive is applied at over 200˚C however care must be taken not to leave the equipment on unused at these high temperatures to avoid adhesive melt back.

All parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).

Need a better price we will try and beat any competitors price - Price Promise

For use with all Tec 43mm Glue Guns

 

Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.

What is a hot melt adhesive ?

Please contact our technical team on 0161 627 1001 to discuss your application in further detail.

Videos Show

Full Specification Show

  • Adhesive Type: Polyolefin
  • Colour: Clear
  • Carton Qty Approx: 10 kilo - approx 17 slugs
  • Open Time: Up to 3 minutes
  • Heat Resistance: 70c
  • Low Temperature: -10c

Downloads Show

SDS Safety Data Sheet
Download

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good