TECBOND 9010 - CT PUR Adhesive

Hard Setting Polyurethane (PUR) Adhesive

  • Adhesive Type: PUR reactive
  • Colour: White
  • Molten Tack: Medium
  • Open Time: Very Long
  • Heat Resistance: 130°C
See the full specification
Made In Britain

Glue Calculator


Select Dots or Beads

Select Glue Amount (KG)

Price Options:


There are no reviews for this product, Be the first...
Read Write
Give us a call on 0161 627 1001

Overview Show

Tecbond 9010-CT PUR reactive glue initially sets in the same way as conventional hot melt but continues to cure over several days, improving its heat and chemical resistance and once set, does not reactivate with heat.

As curing relies on atmospheric moisture, at least one substrate should be porous Suitable for most materials including glass, UPVC, rigid and plasticised PVC, ABS and some other plastics and metals

Not suitable for Polypropylene or Polyethylene.

Sold in 50g cartridges, applied via a Tec 1050 glue gun only.

All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).

Need a better price we will try and beat any competitors price - Price Promise


Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.

What is a hot melt adhesive ?


Please contact our technical team on 0161 627 1001 to discuss your application in further detail.


Full Specification Show

  • Adhesive Type: PUR reactive
  • Colour: White
  • Molten Tack: Medium
  • Open Time: Very Long
  • Heat Resistance: 130°C

Downloads Show

Material Safety Datasheet

Reviews Show

Loading Reviews...

Write a Review Show