Description
Product Description
MXBON MITRE GLUE is a two pack system comprising an high viscosity ethyl cyanoacrylate adhesive and an aerosol activator. Used primarily for instant bonding (10 seconds) of wooden mitre joints, with numerous other uses.
Benefits
Fast setting formulation – bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
DMPT Free Activator
High viscosity adhesive – low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces (eg wood)
Gap filling – high viscosity adhesive will fill small gaps in mitres etc (up to 0.2mm)
Economical in use
Areas For Use
Multitude of industrial applications: Bonds MDF, wood, chipboard, rubber, plastics, Perspex, uPVC ceramics, aluminium and metals.
MXBON Mitre Glue is Ideal for all cornice and profile mitres, trims, picture frames, MDF, skirting and architrave joints, worktop end strips, PVCu trims and much more. It is particularly useful for production lines such as electronics assembly and uPVC window trim bonding.
Limitations
Ensure surfaces are degreased prior to bonding.
Do not use on glass
Do not use in applications involving constant water immersion.
Do not use on bitumen or tar leaching products.
Do not use on load bearing applications
On wooden/porous surfaces, do not use any other cyanoacrylate except MITRE FAST ADHESIVE. These products are thinner and the soak in will give poor bond strength.
FAQs:
Q: What are the key features of MXBON Mitre Glue?
A: MXBON Mitre Glue is a quick-setting, high-viscosity cyanoacrylate adhesive known for its ability to bond a variety of materials such as MDF and metals, featuring gap-filling properties and minimal soak-in for stronger bonds.
Q: How should MXBON Mitre Glue be applied for optimal results?
A: To achieve the best results, clean and dry both surfaces, apply the aerosol activator to one surface, the adhesive sparingly to the other, and press together for about 10 seconds.
Q: Are there any limitations or precautions for using MXBON Mitre Glue?
MXBON Mitre Glue should not be used on glass, under constant water immersion, load-bearing applications, or with materials that leach oil or solvents like bitumen.
