Bonding Cardboard
Tecbond 110-PR
Fast setting adhesive for paper, card & board, carton sealing
Tecbond 110-PR is a high speed packaging adhesive designed for case sealing. It is an economical general pur...
TECBOND 134 / 12mm Tan Fast Setting Packaging
Tan Fast Setting glue stick for paper, card & board, carton sealing. Can also be used as a Low Melt for heat sensitive materials
Tecbond 134 hot melt adhesive is formulated using a minimum of 40% Bio Based raw materials! Be kinder to the...
TECBOND 134 / 15MM Tan Fast Setting Packaging
Tan Fast Setting glue stick for paper, card & board, carton sealing. Can also be used as a Low Melt for heat sensitive materials
Tecbond 134 hot melt adhesive is fast setting glue
TECBOND 134 / 43mm Glue Slugs
Tan Fast Setting glue stick for paper, card & board, carton sealing. Can also be used as a Low Melt for heat sensitive materials
Tecbond 134 hot melt adhesive is formulated using a minimum of 40% Bio Based raw materials! Be kinder to the...
Showing all 4 results
Best Glue for Cardboard: FAQs
What is the best glue for cardboard to cardboard?
For everyday cardboard-to-cardboard bonding, hot melt glue sticks are hard to beat: they set in seconds with no clamping, unlike PVA or contact adhesives which need drying or curing time. Tecbond 134 is formulated specifically for paper, card and board. If you need maximum long-term structural strength rather than speed, PVA wood glue or contact cement will outlast a hot melt bond, but they need time and pressure to set properly.
Is hot melt glue strong enough for cardboard?
Yes. For the vast majority of cardboard projects, model making, packaging, POS displays, carton sealing, a hot melt bond made with the right adhesive (like Tecbond 134) will outlast the cardboard itself; the fibres tear before the glue line fails. It isn’t designed to be waterproof or heat-resistant, so for outdoor or high-temperature use a different adhesive is more appropriate.
What glue should I use for cardboard if I don’t want to use a glue gun?
If you’d rather not use a glue gun, working with kids, no gun to hand, or you want a completely dry, invisible finish, a standard PVA craft glue (white glue) is the usual gun-free alternative. It just needs longer drying time and some light pressure or clamping while it sets. Hot melt is the better choice specifically when you want an instant, gap-filling bond and don’t mind using a glue gun.
Can you use hot melt glue on corrugated cardboard for packaging?
Yes, this is one of the most common industrial uses for hot melt. Tecbond 110-PR and Tecbond 134 are both formulated as high-speed packaging adhesives for case sealing, carton forming and general paper/card/board bonding, giving a fast, reliable seal on production lines without clamping or cure time.
Does hot melt glue damage or warp cardboard?
Used correctly, it shouldn’t. Tecbond 134 can also be run as a low-melt grade for heat-sensitive materials, reducing the risk of scorching thinner or more delicate card. Applying too much glue, or holding the nozzle too close, is what typically causes visible warping or show-through on thin card, a thin, even bead is all that’s needed.
Best Glue for Cardboard by Use Case
| Best For | Recommended Adhesive | Why It’s the Best Choice |
|---|---|---|
| General cardboard crafts, model making & repairs | Tecbond 134 (12mm Tan Fast Setting) | Fast-setting and formulated specifically for paper, card & board. Sets in seconds with no clamping needed. |
| Carton sealing & case forming on a production line | Tecbond 110-PR (Bulk) | A high-speed packaging adhesive designed specifically for case sealing at production speed. |
| Larger-volume craft, display or POS cardboard assembly | Tecbond 134 (43mm Glue Slugs) | The same fast-setting bond in a larger format, built for higher-output 43mm glue guns. |
| Thin or heat-sensitive card (delicate stock, layered paper crafts) | Tecbond 134, run as Low Melt | Tecbond 134 doubles as a low-melt grade, reducing the risk of scorching or show-through on thinner card. |
| Cardboard projects where you’d rather not use a glue gun | Standard craft PVA (white glue) | The simplest gun-free option. It just needs longer drying time and light pressure or clamping while it sets. |
What can we GLUE for you?
We are probably the UK’s if not Europe’s leading supplier of Tecbond shaped hot melt adhesive. Offering the largest range of performance adhesives and hand-held applicators and cardboard glue.
40+ years’ experience, offering specialist knowledge on all aspects of commercial gluing operations – try our Glue Selector
Advanced technology at the UK manufacturing facility and a continuous programme of research and development ensures that we continue to meet the ever changing and challenging needs of industry
Tecbond adhesives are often formulated using raw materials harvested from sustainable managed forests. Our packaging is recyclable, and where possible made from recycled materials
Over 90% of the Tecbond adhesives and Tec glue guns are made in the UK, and we offer 12 months warranty as standard on all our Tec glue gun range 12mm, 15mm, 43mm and spray tools
“How do Hot Melt Adhesives work?
