Spray Adhesives | Carpet Glue Adhesives | Glue Guns Direct

Spray Adhesives - Glue Sticks for Spray Grades

Looking for reliable spray adhesives for industrial and commercial use? Our spray-grade hot melt sticks and aerosol adhesives deliver strong, even coverage across large surfaces. Ideal for foam, fabric, insulation, and carpet fitting, these sprayable glues ensure fast application and consistent results. Whether you need high-temperature resistance, flexible bonding, or precise spray control, Glue Guns Direct supplies professional-grade options to suit every job.

TECBOND 420 / 43mm Spray-Tec Glue Slugs

TECBOND 420 / 43mm Spray-Tec Glue Slugs

43mm adhesive with up to 3 minutes' open time

Tecbond 420 is a high performance, extended open time adhesive primarily formulated for spraying.

Made in Britain
£295.02(inc. VAT £354.02) This product has multiple variants. The options may be chosen on the product page
TECBOND 425 / 43mm Spray-Tec Glue Slugs

TECBOND 425 / 43mm Spray-Tec Glue Slugs

43mm high performance adhesive with up to 3 minutes' open time

Tecbond 425 is a high performance, extended open time adhesive primarily formulated for spraying.

Made in Britain
£295.02(inc. VAT £354.02) This product has multiple variants. The options may be chosen on the product page
TECBOND 430 / 43mm Spray-Tec Glue Slugs

TECBOND 430 / 43mm Spray-Tec Glue Slugs

43mm high performance spray adhesive with up to 6 minutes' open time

Tecbond 430 is a spray adhesive with a very long open time.

Made in Britain
£325.45(inc. VAT £390.54) This product has multiple variants. The options may be chosen on the product page
TECBOND 440 / 43MM SPRAY-TEC GLUE SLUGS

TECBOND 440 / 43MM SPRAY-TEC GLUE SLUGS

Suitable for use on plastics (including PP), foams, wood and cardboard

Tecbond 440 is a spray adhesive with a very long open time. Once applied SPRAYTEC 440 will provide an aggres...

Made in Britain
£325.45(inc. VAT £390.54) This product has multiple variants. The options may be chosen on the product page

Cutting-edge spray adhesive solutions from Glue Guns Direct, offering reliable coverage, precision control, and eco-conscious design. Perfect for industrial, construction, insulation, upholstery, and packaging applications.

Recommended Spray Glue Guns

TEC 6300 43mm Spray Glue Gun

A pneumatic, heavy-duty hot-melt spray applicator. This steel-nozzle tool heats up in just 10 minutes, covering up to 1 m² per minute and dispensing up to 4.2 kg of adhesive per hour. Designed for heat-sensitive surfaces like expanded polystyrene. Solvent-free, non-toxic, and backed by a full UK 12-month warranty when used with Tecbond slugs.

TEC 7300 43mm Spray Glue Gun

A 1000 W powerhouse with a speed-loader for rapid reloading and adjustable spray patterns. Covers up to 2 m² with high-output delivery, making it an excellent bulk alternative to traditional tank systems.

Shop By Need

You’re doing this… We recommend…
Covering large zones quickly TEC 6300 or TEC 7300 spray guns with TECBOND 430/440 adhesive slugs
Needing long open times for positioning TECBOND 430 or 440 spray slugs
Working on heat-sensitive substrates TECBOND 410 or 420 spray slugs

Need Help Choosing?

Use our Glue Selector Tool to match adhesives with substrate type, bond strength, open time, and safety requirements. Our customer support team is also available for personalised advice.

Frequently Asked Questions:

Q: What are spray adhesives?

A: Spray adhesives are aerosol-based bonding agents that apply a thin, even layer of glue across a surface. They’re used for joining lightweight materials such as paper, fabric, foam and plastic.

Q: How does spray adhesive work?

A: The aerosol releases adhesive particles suspended in a solvent. When sprayed, the solvent evaporates, leaving behind a tacky film that bonds surfaces when pressed together.

Q: Is spray adhesive permanent?

A: Some spray adhesives are temporary and allow repositioning, while others form a strong, permanent bond once fully cured. It depends on the formulation and application time.

Q: Is spray adhesive toxic?

A: Many spray adhesives contain solvents that can be harmful if inhaled. Use them in well-ventilated areas and follow safety guidance. Once dry, toxicity levels are significantly reduced.

Q: Is spray adhesive flammable?

A: Yes. Most spray adhesives use flammable propellants or solvents. Keep away from open flames, sparks, or hot surfaces during application and storage.

Q: Can spray adhesive be used on foam?

A: Yes, though only foam-safe formulations should be used. Some solvents may damage or dissolve foam, so testing on a small section first is recommended.

Q: How do you remove spray adhesive residue?

A: Residue can usually be lifted with a citrus-based cleaner, rubbing alcohol, or warm soapy water. Gently scrape if needed, taking care not to damage the surface underneath.

Q: Is spray adhesive waterproof?

A: Most general-purpose spray adhesives are moisture-resistant once dry, but not fully waterproof. Prolonged water exposure can weaken the bond.

Q: Can spray adhesive be used as a sealant?

A: No. Spray adhesive bonds surfaces together but isn’t formulated to create waterproof or airtight seals. A sealant should be used for that purpose.

Q: What’s the difference between spray adhesive and contact adhesive?

A: Spray adhesive delivers a light, even mist over a wide area, ideal for thin materials. Contact adhesive is brushed or rolled on thicker, forming a heavier, more durable bond.

What can we GLUE for you?

We are probably the UK’s, if not Europe’s, leading supplier of Tecbond-shaped hot melt adhesive. Offering the largest range of performance adhesives and hand-held applicators

40+ years’ experience, offering specialist knowledge on all aspects of commercial gluing operations – try our Glue Selector

Advanced technology at the UK manufacturing facility and a continuous programme of research and development ensure that we continue to meet the ever-changing and challenging needs of industry

Tecbond adhesives are often formulated using raw materials harvested from sustainably managed forests. Our packaging is recyclable, and where possible, made from recycled materials

Over 90% of the Tecbond adhesives and Tec glue guns are made in the UK, and we offer 12 months warranty as standard on all our Tec glue gun range 12mm, 15mm, 43mm and spray tools

 “How do Hot Melt Adhesives work?

website is designed, built and managed by thiscreative.com