TECBOND 271-PL

Specifically developed to bond polyethylene and polypropylene

  • Heat Resistance (BS5340): 75ºC
  • Physical Form: Small pillows
  • Suggested Appplication Temperature: 180-190ºC
  • Adhesive Type: Synthetic Polymer Based Hot melt
  • Colour: Light brown
See the full specification
Made In Britain

Price Options:

Quantity:

There are no reviews for this product, Be the first...
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

TECBOND 271-PL has been specifically developed to bond polyethylene and polypropylene. It will also bond most other plastics, non-wovens and fabrics.

It has a good level of both heat and cold resistance. The best results on polyethylene and polypropylene including best low temperature resistance are achieved when the adhesive is applied and the bond is made at the highest possible temperature. We would recommend 190ºC.

Methods of application

Nordson DuraBlue 4L Bulk hotmelt tank, can be bead or spray (swirl) applied.

Suggested application temperature

Suggested application temperature is 180-190ºC depending on substrates to be bonded. To prevent adhesive degradation the tank temperature should be reduced to 150-160ºC during idle and standby periods.

Full Specification Show

  • Heat Resistance (BS5340): 75ºC
  • Physical Form: Small pillows
  • Suggested Appplication Temperature: 180-190ºC
  • Adhesive Type: Synthetic Polymer Based Hot melt
  • Colour: Light brown
  • Molten Tack: High
  • Open Time: Long
  • Pack Size: 15 kg carton

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good