Loctite Retaining

LOCTITE® 603 is designed for the bonding of cylindrical fitting parts, particularly where consistently clean surfaces cannot be assured
Retaining Compound - high strength. Ideal for bearings. For use on close-fitting cylindrical parts. ..
£28.09
(inc. VAT £33.71)
View Product
LOCTITE® 620 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.2 mm and where maximum strength at room temperature is required
LOCTITE 620 is a high strength, high temperature resistant retaining compound. LOCTITE® 620 is a ..
£113.08
(inc. VAT £135.70)
View Product
LOCTITE® 638™ is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm and where maximum strength at room temperature is required
LOCTITE 638 is a high strength, fast curing, general purpose retaining compound. LOCTITE® 638 is ..
£32.39
(inc. VAT £38.87)
View Product
LOCTITE® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for service operations
Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subseque..
£26.88
(inc. VAT £32.26)
View Product
LOCTITE® 648™ is designed for the bonding of cylindrical fitting parts
LOCTITE 648 is a low viscosity, high strength retaining compound with high temperature resistance. I..
£35.32
(inc. VAT £42.38)
View Product
LOCTITE® 660™ is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.50 mm
LOCTITE 660 is a high strength retaining compound with good gap filling properties, ideal for repair..
£28.01
(inc. VAT £33.61)
View Product

Can't find the Loctite product required?

Please call 0161 627 1001 or email: sales@gluegunsdirect.com for further assistance

Keeping you gluing with Loctite!

Anaerobic Adhesives

Our anaerobic adhesive and sealants are some of our most used products and are available for a wide range of applications. Anaerobic adhesives work by completely filling gaps between components. They are typically used to augment the seal or holding force of a mechanically joined assembly.

Anaerobic adhesives remain liquid until isolated from oxygen in the presence of metal ions. Though anaerobic applications differ widely, in most cases the adhesive provides high shear strength and temperature resistance. Anaerobic adhesive compounds fixture in minutes at room temperature and fully cure within 24 hours. Full cure of anaerobics may be achieved more rapidly using short-term exposure to heat (e.g. 30 minutes at 120°C).

LOCTITE® anaerobic adhesives include threadlockers, thread sealants, retaining compounds, and gasket sealants.

4.9/5 RATING Based on 1013 customer product reviews