TECBOND 266 PP bonding
TECBOND 266 PP bonding
Bonding polyofin plastics such as polypropylene and polyethylene
- Adhesive Type: Synthetic polymer hot melt pillows
- Colour: Light Brown
- Molten Tack: High
- Open Time: Long
- Heat Resistance: 90c
Overview
General description
TECBOND 266 is a high performance adhesive formulated for Polyofin plastics such as polypropylene and polyethylene. This adhesive has a high heat resistance and good low temperature resistance. To achieve a good bond on polypropylene it is important that the bond is made at the highest temperature possible ie > 200˚C Good bonds can be achieved on polyethylene, polypropylene, polycarbonate, nylon, rigid PVC, light gauge metals and polystyrene and many other substrates. All bonds should be tested at least 24hours after assembly at both the high and low temperatures they will be expected to withstand in service.
Methods of application
Tecbond adhesives supplied in Pillows and Eco-Blocks aimed at product assembly for use in bulk dispensing equipment such as Nordson DuraBlue systems for demanding or continuous gluing applications or the Tec 4500 Pneumatic glue guns for rework, testing or R&D development
Suggested application temperature
Suggested application temperature is 180-215ºC depending on substrates to be bonded. To prevent adhesive degradation the tank temperature should be reduced to 150-160ºC during idle and standby periods.
F.D.A. approved. All the constituent parts of this adhesive have been approved by the American F.D.A. under C.F.R. 21.175.105 (adhesives) (subject to limitations)
We can also offer most of our standard Tecbond glue sticks in a bulk format !
Specification
Adhesive Type | Synthetic polymer hot melt pillows |
Colour | Light Brown |
Molten Tack | High |
Open Time | Long |
Heat Resistance | 90c |
Low Temperature | -30c |
Reviews
Write Review
