TECBOND 248 / 15mm Clear Acrylic Glue Sticks

15mm, clear acrylic adhesive for difficult to bond materials (ABS, PVC, Metals)

  • Adhesive Type: Acrylic
  • Colour: Clear
  • Carton Qty: 20 sticks per kg
  • Molten Tack: High
  • Open Time: Long
See the full specification
Made In Britain

Glue Calculator

Show

Select Dots or Beads

Select Glue Amount (KG)

Price Options:

Quantity:

There are no reviews for this product, Be the first...
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

When you need glue fast  - Think Tecbond 15mm glue sticks. Tecbond 248 -15mm glue sticks offer an increased output of 30% more molten glue per trigger pull, and with the glue gun holding up to 60% more glue means you do not need to reload as often as you would with a standard 12mm glue stick!

Tecbond 248 is an Acrylic based clear hot melt adhesive that gives exceptional good adhesion to many difficult to bond materials.

Bonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and Melamine. Good bonds can also be achieved on many plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.

Tecbond 248 has been carefully formulated to give an excellent delivery rate through glue guns such as the TEC equipment. This is important as a good tool output enables sufficient adhesive to be applied and bonds made very quickly maximising bond strength.

All parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).

Need a better price we will try and beat any competitors price - Price Promise

For use with all Tec 15 mm glue guns.

 

Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.

What is a hot melt adhesive ?

Please contact our technical team on 0161 627 1001 to discuss your application in further detail.

Full Specification Show

  • Adhesive Type: Acrylic
  • Colour: Clear
  • Carton Qty: 20 sticks per kg
  • Molten Tack: High
  • Open Time: Long
  • Heat Resistance: 75°C
  • Diameter: 125
  • Length: 250mm
  • Low Temperature: -30°C

Downloads Show

Material Safety Datasheet
Download

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good