Product Description

EVERBUILD MITRE FAST is a two pack system comprising an high viscosity ethyl cyanoacrylate adhesive and an aerosol activator. Used primarily for instant bonding (10 seconds) of wooden mitre joints, with numerous other uses. Activator aerosol and adhesive are also sold as separate stock items.

Benefits

Flash setting formulation - bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.

High viscosity adhesive – low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces (eg wood)

Gap filling – high viscosity adhesive will fill small gaps in mitres etc (up to 0.2mm)

Economical in use

Areas For Use

Multitude of industrial applications: Bonds MDF, wood, chipboard, rubber, plastics, Perspex, uPVC ceramics, aluminium and metals.

Ideal for all cornice and profile mitres, trims, picture frames, MDF, skirting and architrave joints, worktop end strips, PVCu trims and much more. It is particularly useful for production lines such as electronics assembly and uPVC window trim bonding.

Limitations

Ensure surfaces are degreased prior to bonding.

Do not use on glass

Do not use in applications involving constant water immersion.

Do not use on bitumen or tar leaching products.

Do not use on load bearing applications

On wooden/porous surfaces, do not use any other cyanoacrylate except MITRE FAST ADHESIVE. These products are thinner and the soak in will give poor bond strength.