Description
When you need glue fast – Think Tecbond 15mm glue sticks. Tecbond 261 -15mm glue sticks offer an increased output of 30% more molten glue per trigger pull, and with the glue gun holding up to 60% more glue means you do not need to reload as often as you would with a standard 12mm glue stick!
Tecbond 261 is a very versatile product that will provide tough durable bonds on a wide range of substrates.
Tecbond 261 is a very soft flexible adhesive that runs well in the Tec 15mm glue guns. If feeding problems occur in lower cost 15mm guns and/or in warm climates then keeping the sticks in the fridge before use can help.
Very high performance, high output, long open time, tough flexible adhesive, suitable for ceramic, plastics (including polypropylene) and wood. Excellent adhesion to varnished board and difficult to bond boards used for carton sealing and closing. Excellent for bonding ceramic tiles, slates, bricks to display boards due to the products unique flexibility. Excellent for bonding polypropylene to itself and other plastics
All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).
For use with all Tec 15mm glue guns.
- Best joint designs for hot melt gluing
- What is a cold bond ?
- Are glue sticks waterproof ?
- What is a Hot Melt Adhesive?
- What makes a Tecbond hot melt glue sticks… stick?
- Hot Melt fumes
Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.
Please contact our technical team on 0161 627 1001 to discuss your application in further detail.
Ken Berry (verified owner) –
I rang for advice on the most suitable glue for HDPE bottles. This does the job well. Long open time and very fluid when molten. Glue type printed on side of stick which is useful if more than one type is in use. Seems to be a good general purpose glue.
Simon (verified owner) –
Well it was worth calling for advice over the phone, and nice to find experts in something so specialised. These are perfect for us – and spectacularly strong.
Simon (verified owner) –
We bought the product for product assembly. But I’ve found myself reaching for the glue gun for all kinds of household jobs too! From fixing the paddling pool leaks to securing loose window bars, it’s even sorted a shower tile grout leak that silicon was unsuitable for – this tecbond glue is flexible enough for that but much stronger than silicon. So – as a joke – whenever anything’s broken we say "….glue gun!" – the solution to everything. And the old glue sticks we used to use didn’t hold anything like as well. This is something different altogether.
Andrew Archer (verified owner) –
We got these glue sticks after looking on the web site for glue to stick aluminium to aluminium and it recommended these , I must say it is a great bond and exactly what we needed . As it said on the site there is a few feeding problems because the stick is so soft but after being in the fridge for a while all is good .
Dave (verified owner) –
Not a lot to say it did the job. being able to look up the product to ensure I was using the correct product was a great help. Was concerned prior to using if I would have time to apply the product to the job piece and then install as was in an awkward place to access.
No problems really impressed with the result.