TECBOND 261 / 15mm Flexible Glue Sticks

Very high performance, versatile 15mm adhesive for flexible bonds

  • Adhesive Type: EVA
  • Colour: Light Brown
  • Carton Qty: 1kg - 20 sticks per kg
  • Molten Tack: Medium
  • Open Time: Long
See the full specification
Made In Britain

Glue Calculator

Show

Select Dots or Beads

Select Glue Amount (KG)

Price Options:

Quantity:

5.0/5.0 from 4 reviews
Read Write
NEED SOME HELP?
Give us a call on 0161 627 1001

Overview Show

When you need glue fast  - Think Tecbond 15mm glue sticks. Tecbond 261 -15mm glue sticks offer an increased output of 30% more molten glue per trigger pull, and with the glue gun holding up to 60% more glue means you do not need to reload as often as you would with a standard 12mm glue stick!

Tecbond 261 is a very versatile product that will provide tough durable bonds on a wide range of substrates. 

Tecbond 261 is a very soft flexible adhesive that runs well in the Tec 15mm glue guns. If feeding problems occur in lower cost 15mm guns and/or in warm climates then keeping the sticks in the fridge before use can help.

Very high performance, high output, long open time, tough flexible adhesive, suitable for ceramic, plastics (including polypropylene) and wood. Excellent adhesion to varnished board and difficult to bond boards used for carton sealing and closing. Excellent for bonding ceramic tiles, slates, bricks to display boards due to the products unique flexibility

All parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).

Need a better price we will try and beat any competitors price - Price Promise

For use with all Tec 15 mm glue guns.

 

Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.

What is a hot melt adhesive ?

Please contact our technical team on 0161 627 1001 to discuss your application in further detail.

 

 

 

Full Specification Show

  • Adhesive Type: EVA
  • Colour: Light Brown
  • Carton Qty: 1kg - 20 sticks per kg
  • Molten Tack: Medium
  • Open Time: Long
  • Heat Resistance: 75°C
  • Diameter: 15mm
  • Length: 300mm

Reviews Show

Loading Reviews...

Write a Review Show

Bad
Good