Description
When you need glue fast – Think Tecbond 15mm glue sticks. Tecbond 23 -15mm glue sticks offer an increased output of 30% more molten glue per trigger pull, and with the glue gun holding up to 60% more glue means you do not need to reload as often as you would with a standard 12mm glue stick!
Tecbond 23 is a product assembly grade with excellent bonding properties and a high level of adhesive strength, suitable for many assembly applications where both high and low temperature conditions prevail.
Tecbond 23 is good on most materials, such as wood, MDF, paper, fabric, many plastics and light gauge metals.
All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).
For use with all Tec 15mm glue guns.
- Best joint designs for hot melt gluing
- What is a cold bond ?
- Are glue sticks waterproof ?
- What is a Hot Melt Adhesive?
- What makes a Tecbond hot melt glue sticks… stick?
- Hot Melt fumes
Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.
Please contact our technical team on 0161 627 1001 to discuss your application in further detail.
Colin Ellis (verified owner) –
Brilliant glue sticks with a very long open time and super strength. I have glued some Birch plywood to Birch Plywood and the glue is stronger than the wood, as when forcing apart, the layers of the ply tear away. I used the Glue application calculator on the web site to choose this particular glue stick and I am very pleased with the excellent results
Mark P (verified owner) –
Excellent for my application.
Karen Beynon (verified owner) –
We have used these glue sticks for many years and they are ideal for the purpose used which is attaching foam to timber and plywood. Due to the price being hiked considerably by our usual supplier we looked for an alternative and came across Kenyon Group and can’t fault the service or price.