TECBOND 134 / 15MM Tan Fast Setting Packaging

TECBOND 134 / 15MM Tan Fast Setting Packaging

5.0/5.0 from 7 reviews

Tan Fast Setting glue stick for paper, card & board, carton sealing. Can also be used as a Low Melt for heat sensitive materials

  • Adhesive Type: EVA
  • Colour: Light Brown
  • Carton Qty Approx: 5kg - 20 sticks per kg
  • Molten Tack: High
  • Open Time: Short
See full spec

Price Options

Quantity:

Buying in bulk, need a better price?
Give us a call on 0161 627 1001
Which Glue Do You Need?
Try out our glue selector…
Grab A Bargain!
Don’t Miss Out On Our Amazing Offers…

Overview

We have a fantastic offer to get you gluing with a Tec 15mm glue gun and we mean fantastic.

Buy 10x 5 kilo cartons of any Tecbond 15mm glue sticks  and receive a FREE Tec 805-15 glue gun (worth £59.60 inc vat!)

No restrictions, buy 100x cartons and receive 10 FREE tools

Read More

When you need glue fast  - Think Tecbond 15mm glue sticks. Tecbond 134 -15mm glue sticks offer an increased output of 30% more molten glue per trigger pull, and with the glue gun holding up to 60% more glue means you do not need to reload as often as you would with a standard 12mm glue stick!

Tecbond 134 very fast setting adhesive designed for packaging application, carton sealing, tray erecting and point of sale. A combination of fast set time and medium viscosity allows Tecbond 134 to be used on a wide range of paper, card, plain and printed board materials.

Can be used as a low melt adhesive for heat sensitive materials, e.g. polystyrene and foam applied via a suitable Tec glue gun at a temperature range between 130c-160c

All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).

For use with all Tec 15mm glue guns.

Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.

Please contact our technical team on 0161 627 1001 to discuss your application in further detail.

Specification

Adhesive Type EVA
Colour Light Brown
Carton Qty Approx 5kg - 20 sticks per kg
Molten Tack High
Open Time Short
Heat Resistance 85°C
Diameter 15mm
Length 300mm

Downloads

Material Safety Datasheet
Download

Reviews

Loading Reviews...

Write Review

Bad
Good